Hyundai Palisade Quiz
Body (Interior and Exterior)

Side Sill Molding

In this manual: Body (Interior and Exterior)
General Information — 10Engine Mechanical System — 56Engine Electrical System — 28Emission Control System — 21Engine Control System/Fuel System — 42Automatic Transmission System (A8LF1) — 33All-Wheel Drive (AWD) System — 16Drive Shaft and Axle — 19Suspension System — 28Steering — 17Restraints — 20Brake System — 39Body (Interior and Exterior) — 142Body Electrical System — 171Heating, Ventilation, and Air Conditioning — 47Advanced Driver Assistance System (ADAS) — 44
3steps
~18min
2/5difficulty
Done 0 of 3

Repair Procedures

Replacement

Hyundai Palisade. Repair procedures
  • When removing with a flat-blade screwdriver or puller, wrap the tool with protective tape to prevent damage to the components.
  • Wear gloves to avoid cutting your hands.
Hyundai Palisade. Repair procedures
  • Be careful not to scratch the body surface.
  1. Remove the rear wheel guard. (Refer to Body Side Moldings - "Rear Wheel Guard Cover")
  2. Using a flat-tip screwdriver or a remover, remove the side sill molding (A).
    Hyundai Palisade. Repair procedures
  3. To install, reverse the removal procedure.
    Hyundai Palisade. Repair procedures
    • Replace any damaged clips (or pin-type retainers).

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.