Advanced Driver Assistance System (ADAS)

Intelligent Cruise Control (SCC) switch

8steps
~48min
2/5difficulty
Done 0 of 8

Components and Component Location

Components

Hyundai Palisade. Components and components location
1. Remote control switch (audio switch) 2. Remote control switch (cruise control switch)

Circuit Diagrams

Wiring Diagram

Trip + CD
Hyundai Palisade. Schematic diagrams

Repair Procedures

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver airbag module. (Refer to Restraint System - "Driver Airbag Module (DAB) and Clock Spring")
  3. Remove the steering wheel. (Refer to Steering System - "Steering Column and Shaft")
  4. Remove the steering wheel rear cover (A) after loosening the screws.
    Hyundai Palisade. Repair procedures
  5. Disconnect the remote control switch connector (A).
    Hyundai Palisade. Repair procedures
    Hyundai Palisade. Repair procedures
  6. Remove the remote control switches (A) after loosening the screws.
    Hyundai Palisade. Repair procedures

Installation

  1. Install in the reverse order of removal.

Inspection

[Resistance Measurement]
  1. Disconnect the cruise control switch connector from the control switch.
    Hyundai Palisade. Repair procedures
  2. Measure the resistance between the terminals of the control switch when each function switch is turned on (switch pressed).
    Function Switch Terminal Resistance [± 3%]
    CANCEL 2 - 6 390 Ω
    SET- 2 - 6 220 Ω
    RES+ 2 - 6 300 Ω
    CRUISE 2 - 6 470 Ω
    CCS 2 - 6 1.5 kΩ

Test yourself

A quick Hyundai Palisade quiz: every answer comes with an explanation and a link to the manual page.