Hyundai Tucson Quiz
Body Work (Interior and Exterior)

Front Seat Belt Buckle

In this manual: Body Work (Interior and Exterior)
General Information — 17Engine Mechanical System — 51Engine Electrical System — 26Emission Control System — 23Engine/Fuel Control System — 44Clutch System — 12MANUAL TRANSMISSION SYSTEM — 12AUTOMATIC TRANSMISSION SYSTEM — 42Four-Wheel Drive (4WD) System — 14Drive Shaft and Axle — 22Suspension System — 30Steering System — 16Restraint — 21Braking System — 47Body Work (Interior and Exterior) — 145Body Electrical System — 162Heating, Ventilation and Air Conditioning — 39
4steps
~24min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Components and Component Location

COMPONENT LOCATION

1. Front seat belt buckle

Repair Procedures

REPLACEMENT

  1. Remove the front seat assembly. (Refer to Front Seat - Front Seat)
  2. Disconnect the wiring from the front seat belt buckle connector (A).
  3. After loosening the mounting bolt, remove the front seat belt buckle protector (A).

    Tightening torque: 39.2 ~ 54 N·m

  4. To install, perform the removal procedure in reverse order.

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.