Knuckle Repair Procedures

DEPOSIT

1. 1
   Remove the front wheel and tire assembly (A) from the hub.

   Tightening torque: 88.3 ~ 108 N·m

   

2. 2
   Loosen the nuts securing the trailing arm, then remove the trailing arm (A).

   Tightening torque: 98.1 ~ 118 N·m

   [ 2WD ]

   

   (4WD)

   

3. 3
   Disconnect the wheel speed sensor connector (A). [ 2WD ]

   

   (4WD)

   

4. 4
   Remove the wheel speed sensor cable and parking brake cable.

   1. Loosen the screw (B), then remove the clip (A) to separate the parking brake cable.

      

   2. Loosen the bolt (A) and nut (B). Remove the cable from the wheel speed sensor and parking brake cable on the knuckle. Tightening torque (A): 8.8 ~ 13.7 N·m (B): 6.8 ~ 10.8 N·m

      

      

5. 5
   Remove the headlight leveling actuator by removing the nut (B).

   Tightening torque: 3.9~5.9 N·m

   

6. 6
   Loosen the set bolt, then remove the knuckle (A) from the chassis.

   Tightening torque: 98.1 ~ 118 N·m

   

7. 7
   To install, perform the removal procedure in reverse order.