Rear Trailing Arm Repair Procedures

DEPOSIT

1. 1
   Remove the front wheel and tire assembly (A) from the hub.

   Tightening torque: 88.3 ~ 108 N·m

   

2. 2
   Loosen the bolt and nut, then remove the additional arm.

   Tightening torque: 137.3 ~ 157 N·m (14.0 ~ 16.0 kgf·m, 101.3 ~ 115.7 lbf·ft)

   

3. 3
   Loosen the bolt and nut, then remove the rear trailing arm from the subframe.

   Tightening torque: 107.9 - 118 N·m

   

4. 4
   To install, perform the removal procedure in reverse order.
5. 5
   Check alignment. (Refer to Tires/Wheels – Wheel Alignment)

Inspection

1. 1
   Make sure the bushing is not worn or damaged.
2. 2
   Make sure that the rear lower arm is not deformed.
3. 3
   Check all bolts and nuts.