Cruise Control Operation

Setting the Set Speed

1. Accelerate to the desired speed, which must be above 20 mph (30 km/h).

2. Press the Driving Assist button () at the desired speed. The set speed and Cruise () indicator will illuminate in the instrument cluster.

3. Release the accelerator pedal. The vehicle will maintain the set speed even when the accelerator pedal is not pressed.

Information

On a steep grade, the vehicle may slightly decelerate or accelerate when driving uphill or downhill.

Increasing the Set Speed

• Press the + switch up and release it immediately. The set speed will increase by 1 mph (1 km/h) each time the switch is operated this way.
• Press and hold the + switch up while monitoring the set speed on the cluster. The set speed will first increase to the nearest multiple of five mph (a multiple of ten), and then increase by 10 km/h each time the switch is operated this way. Release the switch when the desired speed is displayed, and the vehicle will accelerate to that speed.

Decreasing the Set Speed

• Press the - switch down and release it immediately. The set speed will decrease by 1 mph (1 km/h) each time the switch is operated this way.
• Press and hold the - switch down while monitoring the set speed on the cluster. The set speed will first decrease to the nearest multiple of five mph (a multiple of ten), and then decrease by 5 mph (10 km/h) each time the switch is operated this way. Release the switch at the speed you want to maintain.

Temporary Acceleration

If you want to accelerate temporarily while cruise control is on, press the accelerator pedal.

To return to the set speed, release the accelerator pedal.

If you press the + switch up or the - switch down at a higher speed, the set speed will be set to the current increased speed.

Cruise Control Temporarily Paused

Cruise control pauses when:

• The brake pedal is pressed.
• Pressbutton.
• The shift lever is moved to N (Neutral).
• The vehicle speed drops below approximately 20 mph (30 km/h).
• ESC (Electronic Stability Control) is operating.
• Shifting to 2nd gear during Manual Shift Mode.

The set speed will be canceled, but Cruise () will remain on.

NOTICE

If cruise control pauses in a situation not mentioned here, have the vehicle inspected by an authorized HYUNDAI dealer.

Resuming Cruise Control

Press the + switch, - switch, orbutton.

If you press the + switch up or the - switch down, the vehicle speed will be set to the current speed shown in the instrument cluster.

If you press thebutton, the vehicle speed will return to the set speed.

The vehicle speed must be above 20 mph (30 km/h) to resume the function.

WARNING

Check the driving conditions before using the button. The driving speed may increase or decrease suddenly when you press button.

Cancelling Cruise Control

Press the Driving Assist button () button to turn off cruise control. The Cruise () indicator will go off. Always press the Driving Assist button () to turn off cruise control when it is not in use.

Information

If your vehicle is equipped with Manual Speed Limit Assist, press and hold the Driving Assist button to turn off cruise control. However, Manual Speed Limit Assist will turn on.

WARNING

Observe the following precautions when using Cruise Control:

• Always set the vehicle speed to the speed limits in your country.
• Keep cruise control off when the function is not in use to avoid accidentally setting the speed. Check that the Cruise ( ) indicator is off.
• Cruise control does not replace proper and safe driving. It is always the driver's responsibility to drive safely and always be aware of unexpected and sudden situations that may occur.
• Always drive carefully to prevent unexpected and sudden situations from occurring. Pay attention to road conditions at all times.
• Do not use cruise control when it may be unsafe to keep the vehicle at a constant speed:
  - When driving in heavy traffic or when road conditions make it difficult to drive at a constant speed
  - When driving on wet, icy, or snowy roads
  - When driving on hilly or winding roads
  - When driving in windy areas
  - When driving with limited visibility (possibly due to weather such as fog, snow, rain, and sandstorms)
• Do not use cruise control when towing a trailer.