Engine Mechanical System
Rear Oil Seal
In this manual: Engine Mechanical System
5steps
~40min
3/5difficulty
2special tools
Done 0 of 5
Components and Component Location
COMPONENTS

1. Rear oil seal
Repair Procedures
DEPOSIT
- Remove the rear axle with the automatic transaxle assembly. (Refer to Automatic Transaxle System - Automatic Transaxle.)
- Automatic Transaxle: Remove the drive plate. (Refer to Cylinder Block - "Drive Plate")
- Remove the rear oil seal (A).

REMEDY
- Install a new rear oil seal.
- Apply engine oil to the lip of the new oil seal.
- Using SST (09231-H1100, 09214-2E000) and a hammer, tap the oil seal (A) until the SST surface is flush with the rear surface of the cylinder block assembly.

- Install the remaining parts in the reverse order of removal.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?