Heating, Ventilation and Air Conditioning
Blower Motor Repair Procedures
In this manual: Heating, Ventilation and Air Conditioning
7steps
~42min
2/5difficulty
Done 0 of 7
Inspection
- Turn on the ignition, then check the blower motor rotation.

- If the blower motor does not operate properly, replace the blower motor with a new, properly functioning one and verify correct operation.
- If the blower motor is faulty, replace it.
REPLACEMENT
- Disconnect the negative (-) battery terminal.
- To remove the cover under the instrument panel [D] (A), press both sides of the stopper pin, then pull down.

- Disconnect the blower motor connector (A), then remove the blower motor (B) after loosening the mounting screws.

- To install, perform the removal procedure in reverse order.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?