Body Electrical System

HEADLAMP WASHER MOTOR Repair Procedures

15steps
~90min
4/5difficulty
Done 0 of 15

DEPOSIT

HEADLAMP WASHER MOTOR
  1. Disconnect the negative (-) battery terminal.
  2. Remove the right wheel cover.
  3. Disconnect the headlamp motor connector (A).
  4. Remove the headlamp washer motor screw (B).
  5. Remove the headlamp washer hose (C).
  6. Disconnect the negative (-) battery terminal.
  7. Remove the front bumper cover. (Refer to Body - "Front Bumper Cover")
  8. Remove the headlamp washer actuator (A) after loosening the mounting bolts (C) and removing the pipe (B).
Headlamp Washer Actuator

REMEDY

HEADLAMP WASHER MOTOR
  1. Assemble the windshield washer reservoir.
  2. Install the windshield washer reservoir.
  3. Connect the washer hose and the washer motor connector.
  4. Assemble the right wheel cover.
  5. Install the headlamp actuator and hose.
  6. Install the front bumper cover.
  7. Connect the negative (-) battery terminal.
Headlamp Washer Actuator

Test yourself

A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.