Engine Electrical System
Repair Procedures
In this manual: Engine Electrical System
6steps
~36min
2/5difficulty
Done 0 of 6
Inspection on Vehicle
Inspect the ignition coil and perform a spark test.
- Check for DTCs.
- Check for spark.
- Remove the engine cover.
- Remove the ignition coils.
- Remove the spark plugs using a spark plug socket.
- Disconnect the 4 injector connectors.
- Connect the spark plug to engine ground.

- Ignition timing occurs at each spark plug when the engine starts.
- If there is no spark, perform the following procedure.

- Install the spark plugs using a spark plug socket.
- Install the ignition coils.
- Install the cylinder head cover center cover and engine cover.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?