Specifications

Specification

Ignition System

IGNITION COIL

Item	Specification
Primary Winding Resistance (Ω)	0,75 ± 15% [20 °C]
Secondary Winding Resistance (kΩ)	5,9 ± 15% [20 °C]

Spark plug

Item	Specification
Good	SILZKR7B11
Measure	1,0~1,1 (0,0394~0,0433)

Condenser

Item	Specification
Electrostatic Capacitance (µF)	0.47 [1 kHz]
Insulation Resistance (MΩ)	1000 [500 V DC/1 min]

Charging System

GENERATOR

Item		Specification
Rated Voltage		13.5 V, 150 A
Usage Rate		1000 ~ 18000 rpm
Voltage Regulator		Built-in Regulator IC
Regulator Set Voltage	External mode	See figure below
	Internal mode	14.55 ± 0.3 V
Temperature Coefficient	External mode	0±3 mV/°C
	Internal mode	-3.5±2 mV/°C

※ Regulating Voltage Setting (External Mode) BATTERY

Item	Specification
Model Type	▷CMF68L-DIN
Capacity [20h/5h] (Ah)	68/54
Cold Cranking Current (A)	600 (SAE) / 480 (EN)
Reserve Capacity (min)	113

STARTING SYSTEM

STARTER

Item		Specification
Rated Voltage		12V, 1.2kW
Number of sprocket teeth		13
Performance [No load, 11 V]	Current	Max. 70 A
	SPEED	Min. 2400 rpm

Tightening torque

Item	N·m	kgf·m	lbf·ft
Ignition Coil Mounting Bolt	9,8 - 11,8	1,0 - 1,2	7,2 - 8,7
Spark Plug Installation	14,7~24,5	1,5~2,5	10,9~18,1
Condenser Bracket Mounting Bolt	9,8 - 11,8	1,0 - 1,2	7,2 - 8,7
Alternator Mounting Bolt [12 mm (0.47 in.)]	21,6~32,4	2.2 to 3.3	15,9~23,9
Alternator Mounting Bolt [14 mm (13.97 mm)]	29,4~41,2	3,0~4,2	21,7~30,4
Battery Terminal (+) Clamp Nut	7,8 - 9,8	0,8 - 1,0	5,2~8,7
Battery Terminal (+) Clamp Nut	3,9~5,9	0,4~0,6	2,9~4,3
Battery Hold-down Bracket Bolt	8,8~13,7	0,9~1,4	6,5~10,1
Battery Tray Mounting Bolt	8,8~13,7	0,9~1,4	6,5~10,1
Battery Sensor Cable Mounting Bolt	10,8~13,7	1,1~1,4	8,0 ~ 10,1
Starter Mounting Bolt	49,0~63,7	5,0~6,5	36,2~47,0