LCD Messages

Shift to P (for Smart Key System)

This message is displayed if you try to turn off the engine without the shift lever in P (Park).

In this case, turn the Engine Start/Stop button to the ACC position.

Low Battery (for Smart Key System)

This message appears if the smart key battery is discharged when the Engine Start/Stop button is pressed to the OFF position.

Press the START button while turning the steering wheel (for smart key system).

This message appears if the steering wheel does not unlock normally when the Engine Start/Stop button is pressed.

Press the Engine Start/Stop button while turning the steering wheel to the right and left.

Check the Steering Wheel Lock System (for Smart Key System)

This message is displayed if the steering wheel does not lock properly while the Engine Start/Stop button is in the OFF position.

Press the Brake Pedal to Start the Engine (for Smart Key System)

This message appears if the Engine Start/Stop button is pressed repeatedly to change to the ACC position twice without pressing the brake pedal.

You can start the vehicle by depressing the brake pedal and then pressing the Engine Start/Stop button.

Key Not In Vehicle (for Smart Key System)

This message is displayed if the Smart Key is not inside the vehicle when you leave the vehicle with the Engine Start/Stop button in the ON or START position.

Always turn off the engine before leaving the vehicle.

Key Not Detected (for Smart Key System)

This message appears if the smart key is not detected when the Engine Start/Stop button is pressed.

Press the START button again (for Smart Key System)

This message appears if the vehicle could not be started when the Engine Start/Stop button was pressed.

In this case, try to start the engine by pressing the Engine Start/Stop button again.

If this warning message appears every time you press the Engine Start/Stop button, have the vehicle checked by an authorized HYUNDAI dealer.

Press the START button with the key (for Smart Key System)

This message is displayed if you press the Engine Start/Stop button while the "Key Not Detected" warning message is displayed.

At this time, the immobilizer indicator blinks.

Check the BRAKE SWITCH fuse (for Smart Key System).

This message appears if the brake switch fuse is blown.

Replace the fuse with a new one before starting the engine.

If this is not possible, you can start the engine by pressing and holding the Engine Start/Stop button for 10 seconds in the ACC position.

Shift to P to Start the Engine (for Smart Key System)

This message is displayed if you try to start the engine in any position other than P (Park).

Battery Discharge Due to External Electrical Devices (if equipped)

This message is displayed if the 12 V battery voltage is too low due to non-factory electrical accessories (e.g., a dash camera) used while parked. Be careful not to discharge the battery.

If the message appears after removing non-factory electrical accessories, have the vehicle checked by an authorized HYUNDAI dealer.

Door, Hood, and Trunk Open Warning

This warning is displayed if any door, the hood, or the tailgate remains open. The display will show which door is open.

CAUTION

Before driving, make sure the door/hood/tailgate is fully closed.

Also check that the door/hood/tailgate open indicator or message is not displayed on the instrument cluster.

Sunroof Open Warning Light

This warning appears if you turn off the engine while the sunroof is open.

Securely close the sunroof before leaving the vehicle.

Low Tire Pressure

This warning message appears if tire pressure is low. The corresponding tire on the vehicle will be illuminated.

Lights

This indicator shows which exterior light is selected with the light control switch.

You can enable or disable the Wiper/Lights display function in the User Settings menu on the cluster LCD.

Select:

- Settings - User Settings - Cluster - Wiper/Lights Display

Wiper Arm

This indicator shows which wiper speed is selected with the wiper control switch.

You can enable or disable the Wiper/Lights display function in the User Settings menu on the cluster LCD.

Select:

- Settings - User Settings - Cluster - Wiper/Lights Display

Low Washer Fluid

This message appears if the washer fluid level in the reservoir is almost empty.

Fill the washer fluid reservoir.

Low Fuel

This message appears if the fuel in the fuel tank is almost empty.

When this message is displayed, the low fuel warning light in the instrument cluster will illuminate.

It is recommended to find the nearest gas station and refuel as soon as possible.

Low Engine Oil Level (if equipped)

This warning message is displayed when the engine oil level needs to be checked.

If this warning message is displayed, check the engine oil level as soon as possible and add engine oil as necessary.

Slowly pour the recommended oil into the funnel in small amounts.

Use only the specified engine oil. (Refer to "Recommended Lubricants and Capacities" in Chapter 2.)

Do not overfill the engine oil. Make sure the oil level is not above the F (Full) mark on the dipstick.

Engine Overheating / Engine Overheat (if equipped)

This message is displayed when the engine coolant temperature exceeds 248°F (120°C). This means the engine is overheated and may be damaged.

If your vehicle has overheated, refer to the "Overheating" section in Chapter 8.

Check Exhaust System (if equipped)

This message is displayed if there is a problem with the GPF system. At this time, the GPF indicator light will also flash. In this case, have the GPF system checked by an authorized HYUNDAI dealer.

GPF: Gasoline Particulate Filter

Check Headlamp (if equipped)

This warning message is displayed if the headlights are not operating properly.

In addition, if a specific light (turn signal light, etc.) is not operating properly, a warning message is displayed according to the specific light (turn signal light, etc.). It may be necessary to replace the corresponding bulb.

Be sure to replace a burned-out bulb with a new one of the same wattage.

Check the turn signal (if equipped)

This message is displayed if the turn signal lamps are not operating properly. A lamp may need to be replaced.

Be sure to replace a burned-out bulb with a new one of the same wattage.

Check Headlamp LED (if equipped)

This message is displayed if there is a problem with the LED headlamp. Have the vehicle inspected by an authorized HYUNDAI dealer.

Check the Forward Collision-Avoidance Assist system (if equipped).

This warning message is displayed if there is a problem with the Forward Collision-Avoidance Assist system. Have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to "Forward Collision-Avoidance Assist (FCA) System" in chapter 6.

Check the Lane Keeping Assist system (if equipped).

This warning message is displayed if there is a problem with the Lane Keeping Assist system. Have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to "Lane Keeping Assist (LKA) System" in chapter 6.

Check the Blind-Spot Collision Warning system (if equipped).

This message is displayed if there is a problem with the Blind-Spot Collision Warning system. Warning. Have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to "Blind-Spot Collision Warning (BCW) System" in chapter 6.

Check the Driver Attention Warning system (if equipped).

This message is displayed if there is a problem with the Driver Attention Warning function. Warning. Have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to "Driver Attention Warning (DAW)" in chapter 6.

Check the High Beam Assist system (if equipped).

This message is displayed if there is a problem with the High Beam Assist system. Have the vehicle inspected by an authorized HYUNDAI dealer.

For more information, refer to "High Beam Assist (HBA)" in chapter 5.

Check the Smart Cruise Control system (if equipped).

This message is displayed if there is a problem with the Smart Cruise Control system. Have the vehicle inspected by an authorized HYUNDAI dealer.