Hyundai Tucson LM Quiz
Drive Shaft and Axle

BJ Boot Repair Procedures

In this manual: Drive Shaft and Axle
General Information — 1Engine Mechanical System — 44Engine Electrical System — 45Emission Control System — 24Engine Control System/Fuel System — 93Clutch System — 13Manual Transmission — 18Automatic Transmission — 87Four-Wheel Drive (4WD) System — 26Drive Shaft and Axle — 29Suspension System — 35Steering — 20Restraints — 47Brake System — 36Body (Interior and Exterior) — 53Body Electrical System — 202Heating, Ventilation, and Air Conditioning — 58
7steps
~42min
2/5difficulty
Done 0 of 7

Removal

  1. Remove the front drive shaft. (Refer to Drive Shaft Assembly - "Front Drive Shaft")
  2. Remove the TJ joint assembly. (Refer to Drive Shaft Assembly - "TJ Joint")
  3. Remove the dynamic damper. (Refer to Drive Shaft Assembly - "Dynamic Damper")
  4. Using pliers or a flat-tip screwdriver (-), remove the BJ boot bands (A).
  5. Remove the BJ boot.
  6. Install in the reverse order of removal.
  7. Check the front alignment. (Refer to Suspension System - "Front Wheel Alignment")

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.