Body Electrical System

Power Seat Control Switch Repair Procedures

5steps
~30min
2/5difficulty
Done 0 of 5

Inspection

  1. With the power seat switch in each position, check that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch.

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the power seat cover. (Refer to Group BD - "Front Seat")
  3. Remove the power seat control switch (A).

Installation

  1. Install the power seat control switch after connecting the connector.
  2. Install the seat cover and the power front seat.

Test yourself

A quick Hyundai Tucson LM quiz: every answer comes with an explanation and a link to the manual page.