Repair Procedures

Inspection

1. 1
   Park the vehicle on a level surface and stop the engine.
2. 2
   Reinstall the filler plug (A) with a new washer.

   

3. 3
   Check the level with your finger.

   The fluid level should be at the level of the filler hole. If not, add oil until it overflows.

   

4. 4
   Install the filler plug.

   Tightening torque: 58.9 ~ 78 N·m

5. 5
   Park the vehicle on a level surface and stop the engine.
6. 6
   Drain the oil from the manual transmission by removing the drain plug (A).

   

7. 7
   Install the drain plug with a new gasket.

   Tightening torque: 58.9 ~ 78 N·m

8. 8
   Add new oil through the filler hole until the oil level is just below the filler hole. Standard oil: SAE 75W/85, API GL-4. Oil capacity: 1.9 ~ 2 L (0.50 ~ 0.53 US gal, 2.01 ~ 2.11 US qt, 1.67 ~ 1.76 Imp qt)