Door Frame Removal

NOTE:

On four-door models, the rear door frames must be removed first, followed by the front door frames.

1. 1
   Using the supplied Torx #40 screwdriver and ratchet, loosen the Torx screws located on the underside of each door frame (two per door).

   

   Door Frame Screw Location

2. 2
   After fully loosening, remove the screws by pulling downward.

   NOTE:

   The screws will not fall out after being fully loosened, as they are retained in place by an internal mechanism.

   

   Remove the Screws from Under the Frame

3. 3
   Lift the frame up and off the vehicle.

   

   Step Three

4. 4
   Store the screws in a secure location.
5. 5
   Repeat the procedure for the front door frame (four-door models).

• Do not drive on public roads with the door frame(s) removed, as you lose the protection they can provide. This procedure is intended for off-road use only.
• Do not drive on public roads with the doors removed, as you lose the protection they can provide. This procedure is intended for off-road use only.