Arming the Security Alarm

Perform the following steps to arm the vehicle security system:

1. 1
   Make sure the ignition is in the OFF position.
2. 2
   Perform one of the following methods to lock the vehicle:

   • Press the power door lock switch while the driver and/or passenger door is open.
   • Press the lock button on the outside door handle of the Passive Entry with a valid key fob within the same exterior zone.
   • Press the lock button on the key fob.
3. 3
   If any doors are open, close them.

NOTE:

The vehicle security system will not arm if you lock the doors using the manual door lock.