Kawasaki Ninja ZX-10R Quiz
Engine Top End

Camshaft Runout Inspection

In this manual: Engine Top End
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Remove the camshafts (see Camshaft Removal).
  • Set the camshaft in a camshaft alignment jig or on V blocks.
  • Measure the runout with a dial gauge at the specified place as shown in the figure.

If the runout exceeds the service limit, replace the camshaft.

Camshaft Runout Standard: TIR 0.02 mm (0.0008 in.) or less Service Limit: TIR 0.1 mm (0.004 in.)

Camshaft Runout Inspection

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.