Nozzle Assy Installation

• Replace the dust seals [A] with new ones.
• Apply engine oil to the new dust seals, and install them.
• Install the nozzle assy securely.

Push the four mounting positions of the injectors.

Set the joint pipe parallel to the air cleaner housing [B].

NOTICE

When installing the nozzle assy, apply force equally to the delivery pipe assy.

Pushing the fuel pipe strongly could damage it as it is made from resin.

• Tighten the mounting bolts as shown sequence [1 ∼ 4] in the figure.

Torque - Nozzle Assy Mounting Bolts: 4.9 NВ·m (0.50 kgfВ·m, 43 inВ·lb)

• Run the leads correctly (see Cable, Wire, and Hose Routing section in the Appendix chapter).
• Connect the secondary fuel hose to the delivery pipe of the nozzle assy (see Fuel Hose Replacement in the Periodic Maintenance chapter).