Kawasaki Ninja ZX-10R Quiz
Electrical System

Relay Circuit Inspection

In this manual: Electrical System
General Information — 26Periodic Maintenance — 66Fuel System (DFI) — 79Cooling System — 28Engine Top End — 51Clutch — 24Engine Lubrication System — 28Engine Removal/Installation — 5Crankshaft/Transmission — 65Wheels/Tires — 22Final Drive — 17Brakes — 54Suspension — 36Steering — 17Frame — 40Electrical System — 104Self-Diagnosis System — 112Appendix — 10
~1min read
  • Remove the relay box (see Relay Box Removal).
  • Check conductivity of the following numbered terminals by connecting the hand tester and one 12 V battery to the relay box as shown in the figure (see Relay Box Internal Circuit in this section).

If the tester does not read as specified, replace the relay box.

Relay Circuit Inspection (with the battery disconnected)


*: The actual reading varies with the hand tester used.

Relay Circuit Inspection (with the battery connected)


(+): Apply positive lead.

(–): Apply negative lead.

Test yourself

A quick Kawasaki Ninja ZX-10R quiz: every answer comes with an explanation and a link to the manual page.