Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Blind-Spot Detection Switch Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
10steps
~60min
3/5difficulty
Done 0 of 10

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the interior fuse panel cover.
  3. Remove the driver's side cover (A).
  4. Remove the side hazard switch assembly (A) by pushing it through the hole in the side cover.
  5. Disconnect the connector (A) from the lower hazard switch.

Installation

  1. Install the lower hazard switch.
  2. Install the driver's side cover.
  3. Connect the negative (-) battery terminal.

Inspection

  1. Disconnect the BSD switch connector.
  2. Turn on the BSD switch, then check the circuit continuity between the terminals of the BSD switch connector.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.