Kia Cadenza VG Owner's Manual Quiz
Body Electrical System

Blind-Spot Detection Unit Repair Procedures

In this manual: Body Electrical System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
6steps
~36min
2/5difficulty
Done 0 of 6

Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the rear bumper. (Refer to Body - "Rear Bumper")
  3. Loosen the mounting bolts, then remove the BSD unit (A).

Installation

  1. Install the BSD units to the rear bumper.
  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
    Item Left (Slave) Right (Master)
    Waveform

    Notes Check the shape of the mounting screw hole.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.