Kia Cadenza VG Owner's Manual Quiz
Emission Control System

Canister Repair Procedures

In this manual: Emission Control System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
5steps
~30min
2/5difficulty
010203040505.94N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal

  1. Turn the ignition switch OFF and disconnect the negative (-) battery cable.
  2. Disconnect the vent hose (A) from the fuel tank air filter.
  3. Disconnect the quick connector (B) of the evap tube and the quick connector (C).
  4. Loosen the mounting bolts (A) and remove the canister housing.
  5. Remove the bracket (A) from the canister by loosening the bolts (B).

Inspection

  1. Visually check for the following items.
    • Cracks or leaks in the canister
    • Poor connection, deformation, or damage of the vapor hose/tube.
    A: Canister ↔ Atmosphere B: Canister ↔ Fuel Tank C: Canister ↔ Intake Manifold

Installation

  1. Install in the reverse order of removal.

Canister Mounting Bolt: 3.9 ~ 5.9 N·m

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.