Description and Operation

Safety Power Window Function

1. 1
   Safety function condition: When a force of 100 N (using a 10 N/mm spring) is detected while the window is closing, the window reverses.
2. 2
   Window reverse distance (except when holding the auto-up switch)

   • When a jam is detected 4–250 mm from the top of the door, the window reverses to 300 mm from the top of the door.

     

   • When a pinch is detected at a distance of more than 250 mm from the top of the door. → The window reverses to 20 mm from the pinch position.

     

3. 3
   Window reverse distance (holding the auto-up switch)

   • When a pinch is detected while holding the auto-up switch: the window reverses to 25 mm from the pinch position.
   • The automatic up function is not available for 5 seconds after the above condition. → When the automatic up switch is held, the window operates as a manual up function. (The safety function is not activated.)
   • When the auto-up switch is held for 5 seconds from the above condition. → The window reverses to 25 mm from the pinch position.

     

4. 4
   Safety function not available. The safety function is not available within 4 mm from the top of the door.
5. 5
   Battery Connection Initialization: If the battery is not connected to the vehicle for 5 minutes, initialization of the power window switch is required.

   1. Window Operation Before Initialization
      • Manual up/down function is available.
      • Auto-up function is not available. (When the auto-up/down switch is held, the window operates as manual up/down.)
   2. Initialization Method
      Close the window from the fully open position and hold the switch in the fully closed position for more than 0.2 seconds. (If closing is started from the fully closed window position, initialization may fail.)
   3. When initializing the safety power window in the lock condition, the following conditions may occur.
      • Safety Function Not Available
6. 6
   Fail-Safe Mode Initialization

   1. If the window is forcibly moved and the motor is faulty, the window switch may enter fail-safe mode for user safety.
   2. Power Window Operation in Fail-Safe Mode
      • Auto/Manual-Down function is available.
      • Auto/Manual-Up function is not available. (During auto/manual up, the window rises 20 mm and stops moving.)