Body Electrical System
Rear Sunshade Repair Procedures
In this manual: Body Electrical System
7steps
~42min
2/5difficulty
Done 0 of 7
Inspection
Connect battery voltage and check the rear sunshade motor rotation. If the motor does not operate properly, replace it with a known good rear sunshade motor and check its operation.
Removal
- Disconnect the negative (-) battery terminal.
- Remove the rear package tray (A) after removing the rear seat. (Refer to Body group - Interior Trim)
- Remove the rear sunshade (A) after removing the connector and bolts (8EA).
- If it is necessary to remove the rear sunshade motor (A), remove the screws (3EA).
Installation
- Install the rear sunshade and connector.
- Install the rear parcel shelf and rear seat.
- Connect the negative (-) battery terminal.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?