Kia Cadenza VG Owner's Manual Quiz
Steering

Repair Procedures

In this manual: Steering
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
9steps
~59min
3/5difficulty
1special tools
02040608010044.133N·mlb·ft
Tightening torque found on this page
Done 0 of 9

Removal

  1. Disconnect the negative battery cable from the battery and wait at least 30 seconds.
  2. Turn the steering wheel so that the front wheels point straight ahead.
  3. Remove the driver airbag module. (Refer to Restraints — Driver Airbag (DAB) Module.)
  4. Disconnect the steering wheel lock nut (A) and connector (B), then remove the steering wheel using the special service tool. (09561-11001) Tightening torque: (~2012.09.23) 39.2~44 N·m Tightening torque: (2012.09.24~) 39.2~49 N·m
    • Do not strike the steering wheel to remove it; this may damage the steering column.
  5. Installation is the reverse of removal.

Disassembly

  1. Loosen the screw (6EA) and remove the lower cover (A) from the steering wheel housing.
  2. Disconnect the wiring (A).
  3. Loosen the screws (2 pcs) and remove the remote control switch (A) from the steering wheel housing.
  4. Installation is the reverse of removal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.