Engine Electrical System
Specifications
In this manual: Engine Electrical System
~3min read
Specification
Ignition System
Ignition Coil| Item | Specification |
| Primary Winding Resistance (Ω) | 0,62 ± 10% [20 °C] |
| Secondary Winding Resistance (kΩ) | 7,0 ± 15% [20 °C] |
Spark Plug
| Item | Specification |
| Type | SILZKR7B11 |
| Gap | 1.0 – 1.1 mm (0.0394 – 0.0433 in) |
Condenser
| Item | Specification |
| Capacitance (μF) | 0.47 [1 kHz] |
| Insulation Resistance (MΩ) | 1000 [500 V DC/1 min] |
Charging System
Generator| Item | Specification |
| Rated Voltage | 13.5 V, 150 A |
| Operating Speed | 1500 ~ 18000 rpm |
| Voltage Regulator | Built-in IC regulator type |
| Regulated Voltage Default (V) [COM Terminal] | 14.0 - 15.5 (-35°C) |
| 14.0 – 15.0 (25°C) | |
| 13.1 - 15.0 (140°C) | |
| Regulator Setting Voltage (V) [COM terminal] | 11.6 – 15.4 [5000 rpm/10A] |
| Allowable input load at L terminal voltage [V] | 12 |
| Generator warning lamp function | Rotor coil disconnected |
| Overvoltage | |
| Low voltage |
Battery
| Item | Specification |
| Model Type | CMF80L-BCI |
| Capacity [20h/5h] (Ah) | 80/64 |
| Cold Cranking Amps (A) | 660 (SAE) / 528 (EN) |
| Reserve Capacity (min.) | 145 |
Starting System
Starter Motor| Item | Specification | |
| Rated Voltage | 12 V, 1.7 kW | |
| Number of Gear Teeth | 12 | |
| Performance [No Load, 11.5 V] |
Amperes | Max. 85 A |
| Speed | Min. 2550 rpm | |
Tightening torque
| Item | N·m | kgf·m | lb-ft |
| Ignition Coil Mounting Bolt | 9,8 ~ 11,8 | 1,0 ~ 1,2 | 7,2 ~ 8,7 |
| Spark Plug Installation | 14,7 ~ 24,5 | 1,5 ~ 2,5 | 10,9 ~ 18,1 |
| Condenser and suspension bracket mounting bolt | 6,9 ~ 10,8 | 0,7 ~ 1,1 | 5,1 ~ 8,0 |
| Generator mounting bolt | 26,5 ~ 33,3 | 2,7 ~ 3,4 | 19,5 ~ 24,6 |
| Battery (+) Terminal Clamp Tightening | 7,8 ~ 9,8 | 0,8 ~ 1,0 | 5,2 ~ 8,7 |
| Battery (-) terminal clamp nut | 4,0 ~ 6,0 | 0,4 ~ 0,6 | 2,9 ~ 4,3 |
| Battery mounting bracket bolt | 9,8 ~ 11,8 | 1,0 ~ 1,2 | 7,2 ~ 8,7 |
| Battery Tray Mounting Bolt | 8,8 ~ 13,7 | 0,9 ~ 1,4 | 6,5 ~ 10,1 |
| Starter Mounting Bolt | 49,0 ~ 63,7 | 5,0 ~ 6,5 | 36,2 ~ 47,0 |
| Starter cover mounting bolt | 8,8 ~ 13,7 | 0,9 ~ 1,4 | 6,5 ~ 10,1 |
| Starter cover nut | 4,0 ~ 6,0 | 0,4 ~ 0,6 | 2,9 ~ 4,3 |
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?