Kia Cadenza VG Owner's Manual Quiz
Suspension System

Wheel Repair Procedures

In this manual: Suspension System
General Information — 15Engine Mechanical System — 95Engine Electrical System — 54Emission Control System — 24Engine Control System/Fuel System — 115Automatic Transmission — 91Drive Shaft and Axle — 13Suspension System — 35Steering — 19Restraints — 46Brake System — 43Body (Interior and Exterior) — 51Body Electrical System — 245Heating, Ventilation, and Air Conditioning — 56
3steps
~18min
2/5difficulty
04080120160200107.980N·mlb·ft
Tightening torque found on this page
Done 0 of 3

Hub Nut Tightening Sequence

Tighten the hub nuts as follows.

Tightening torque: 88.3 ~ 108 N·m
When using an impact wrench, the final tightening torque must be checked with a torque wrench.
Perform inspection
  1. Raise the vehicle.
  2. Measure wheel runout with a dial indicator as shown in the illustration below.
    Run out Aluminum
    Radial mm (in) Less than 0.3 (0.012)
    Lateral mm (in) Less than 0.3 (0.012)
  3. If the measured value exceeds the specified value, replace the wheel.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.