Tire Repair Procedures

Tire Wear

1. 1
   Measure the tire tread depth.

   Tread depth [limit]: 1.6 mm (0.063 in)

2. 2
   If the remaining tread depth (A) is less than the limit, replace the tire.

   When the tire tread depth is less than 1.6 mm (0.063 in), the wear indicators (B) will appear.

   

Removal

1. 1
   Remove the tire.
2. 2
   Remove foreign material from the wheel.
3. 3
   Release the air through the tire valve (A).

   

4. 4
   Install the bead breaker on the tire, then remove the tire bead from the rim by pressing the pedal.

   

5. 5
   Operate the bead breaker at various points until the tire is completely separated from the rim.
6. 6
   Place the wheel on the turntable, then secure it with the step clamp by pressing the pedal.
7. 7
   Install the rim clamp and then secure it.

   

   When mounting, install the head with the left part mounted first.

   Install on the right side of the TPMS sensor mounting head when the turntable rotates counterclockwise.

8. 8
   Install the lever, then position the upper tire between them.

   

9. 9
   While pressing the turntable pedal, rotate the turntable clockwise, then separate the outer part of the tire from the wheel.
10. 10
    Remove the tire from the wheel inside the tire in the same way as No. 10.

    

11. 11
    Install in the reverse order of removal.