Body Electrical System

Windshield De-Icer Repair Procedures

4steps
~24min
2/5difficulty
Done 0 of 4

Inspection

  1. Remove the hood top cover. (Refer to Wiper)
  2. Disconnect the windshield de-icer connector (A) from the wiper motor linkage.
  3. Check for continuity in the de-icer line terminals.
  4. Turn the ignition and windshield de-icer switch ON, then measure the voltage between the terminals on the wire harness side of the de-icer connector.

    OK: Battery voltage is normal.

Test yourself

A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.