Body Electrical System
Windshield Wiper and Washer Switch Repair Procedures
In this manual: Body Electrical System
5steps
~30min
2/5difficulty
Done 0 of 5
Inspection
Check the continuity between the terminals while operating the wiper and washer switch. If the continuity is not normal, replace the wiper and washer switch.
Removal
- Remove the upper and lower steering column shrouds by removing the 3 screws.
- Disconnect the wiper switch connector (A) by releasing the part.
- If necessary to remove the wiper and washer switch (A), only unlock the wiper switch lock with a tool, without removing the steering wheel and clock spring.
Installation
- Install the wiper switch.
- Install the upper and lower steering column covers.
Test yourself
A quick Kia Cadenza VG Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?