Service Highlight

BMS ECU Repair procedures

4steps
~24min
3/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Shut off the High Voltage circuit.

    (Refer to Hybrid Control System - “High Voltage Shutoff Procedure”)

  2. Remove the high voltage front cover.

    (Refer to High Voltage Battery System - "Case")

  3. Disconnect the BMS ECU Connector (A).

  4. Remove the BMS ECU (B) after loosening the mounting nuts.

    BMS ECU mounting nut : 7.8 - 11,8 N·m

Installation

  1. Install the BMS ECU in the reverse order of removal.