Service Highlight
Safety Plug Repair procedures
In this manual: Service Highlight
7steps
~42min
4/5difficulty
Done 0 of 7
Removal
Turn the ignition switch OFF and disconnect the auxiliary 12V battery negative (-) terminal.
Remove the safety plug cover (A).

Unfasten the hook (A) to the direction of arrow.

Unfasten the lever (A) to the direction of arrow.

Remove the safety plug (A).

Inspection
Remove the safety plug.
(Refer to "Removal")
Check the safety plug by visual check and electrical test.
- Check the interlock switch (A) and high voltage terminal (B).

Installation
Install the Safety Plug in the reverse order of removal.
Was this page helpful?