Engine Mechanical System

Crankshaft Damper Pulley Repair procedures

5steps
~40min
3/5difficulty
2special tools
030609012015071.653N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Removal and Installation

  1. Remove the RH front wheel.

    (Refer to Suspension System - "Wheel")

  2. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

  3. Remove the drive belt.

    (Refer to Drive Belt System - "Drive Belt")

  4. Remove the crankshaft damper pulley (A).

    Tightening torque :

    [64.7 - 72 N·m] + [39 - 41°]

  5. Install in the reverse order of removal.