Body (Interior and Exterior)
Front Seat Cushion Cover Repair procedures
In this manual: Body (Interior and Exterior)
8steps
~53min
3/5difficulty
1special tools
Done 0 of 8
Replacement
Remove the front seat shield inner cover.
(Refer to Front Seat - "Front Seat Shield Inner Cover")
Remove the front seat outer shield cover.
(Refer to Front Seat - "Front Seat Outer Shield Cover")
Remove the front seat lower protector (A).

Disconnect the airbag connector (A), heater connector (B), and extension wiring connector (C).

Pull out the protectors (A), and then separate the front seat cushion cover from the front seat cushion frame.


Remove the front seat cushion cover (A) from the front seat cushion frame.

Remove the velcro tape (A) and hog-ring clips (B) from the front of seat cushion.

Install in the reverse order of removal.
Was this page helpful?