Body (Interior and Exterior)

Front Seat Frame Assembly Repair procedures

6steps
~36min
2/5difficulty
02040608010053.940N·mlb·ft
Tightening torque found on this page
Done 0 of 6

Replacement

  1. Remove the front seat back cover.

    (Refer to Front Seat - "Front Seat Back Cover")

  2. Remove the front seat cushion cover.

    (Refer to Front Seat - "Front Seat Cushion Cover")

  3. Remove the side airbag (SAB) module.

    (Refer to Airbag Module - "Side Airbag (SAB) Module")

  4. Remove the lumbar support assembly.

    (Refer to Body Electrical System - "Lumbar Support Unit")

  5. After loosening the mounting bolts, disconnect the front seat back frame assembly (A) and front seat cushion frame assembly (B).

    Tightening torque : 44.1 - 54 N·m

  6. Install in the reverse order of removal.