Brake System

Front Wheel Speed Sensor Repair procedures

8steps
~48min
3/5difficulty
04080120160200127.594N·mlb·ft
Tightening torque found on this page
Done 0 of 8

Removal

  1. Remove the tire.

    Tightening torque: 107.9 - 128 N·m

  2. Remove the wheel speed sensor bolt (A).

    Tightening torque: 7.8 - 11,8 N·m

  3. Remove the wheel speed sensor bracket bolt (A).

    Tightening torque : 8.8 - 13,7 N·m

  4. Remove the front wheel guard.

    (Refer to body - "Front Wheel Guard")

  5. Disconnect the front wheel speed sensor.

  6. Installation is the reverse of removal.

Inspection

  1. Measure the output voltage between the terminal of the wheel speed sensor and the body ground.

  2. Compare the change of the output voltage of the wheel speed sensor to the normal change of the output voltage as shown below.

    V_low : 0.59V - 0.84V V_high : 1.18V - 1.68V Frequency range : 1 - 2,500Hz