Hybrid Power Control Unit (HPCU) Repair procedures
Removal
Hybrid Power Control Unit (HPCU)
Shut off the high voltage circuit.
(Refer to Hybrid Control System - “High Voltage Shutoff Procedure”)
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air Cleaner")
Remove the ECM & TCM bracket assembly.
(Refer to Engine Control/Fuel System - "Engine Control Module")
Drain the coolant of hybrid motor cooling system.
(Refer to Hybrid Motor Cooling System - "Coolant")
Remove the HPCU protector (A) after loosening the mounting bolts.

Disconnect the motor power cable connector (A) and HSG power cable conector (B).

Disconnect the power cable (A) [↔ High voltage battery system assembly] and power cable (B) [↔ HSG & Electric A/C compressor].

Disconnect the HCU & inverter (MCU) connector (A).

Disconnect the coolant outlet hose & pipe (A) after loosening the mounting bolt.

Disconnect the LDC power output cable (A) and LDC ground (-) cable (C) after loosening the mounting bolt and nut.
LDC power (12V) output cable mounting nut :
10.8 - 13,7 N·m
LDC ground cable mounting bolt :
7.8 - 11,8 N·m

Remove the HPCU (B) after looening the mounting bolts.
HPCU mounting bolt : 21.6 - 24 N·m

Remove the coolant hose & pipe (A) from the HPCU.
Remove the reservoir (B) after loosening the mounting bolts.
Reservoir mounting bolt : 3.9 - 5,9 N·m


Hybrid Power Control Unit (HPCU) Tray
Remove the hybrid power control unit.
(Refer to Hybrid Control System - "Hybrid Power Control Unit (HPCU)")
Remove the hybrid power control unit tray (A) after loosening the mounting bolts.
Hybrid Power Control Unit (HPCU) tray mounting bolt :
21.6 - 24 N·m


Installation
Install the HPCU in the reverse order of removal.
Refill the hybrid motor cooling system coolant and perform air bleeding by using the KDS/GDS. (refer to Hybrid Motor Cooling System - "Coolant").
Adjustment
HCU Variant Coding
Turn the ignition switch OFF.
Connect the KDS / GDS to Data Link Connector (DLC).
Turn the ignition switch ON.
Select "Vehicle, Model year, Engine, System".
Select "Vehicle S/W Management".
Select "HCU Variant Coding".

Engine Clutch / Motor Resolver learning procedure
Perform Engine Clutch / Motor Resolver learning after replacing the HPCU.
(Refer to Clutch System - "Engine Clutch Actuator")