Engine Electrical System

Ignition Coil Repair procedures

4steps
~24min
2/5difficulty
0102030405011.89N·mlb·ft
Tightening torque found on this page
Done 0 of 4

Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.

  2. Remove the engine cover.

  3. Disconnect the ignition coil connector (A).

  4. Remove the ignition coil (A) after loosening the mounting bolt.

    Ignition coil mounting bolt : 9.8 - 11,8 N·m

Installation

  1. Install in the reverse order of removal.