Engine Electrical System

Repair procedures

6steps
~36min
2/5difficulty
Done 0 of 6

On-vehicle Inspection

Inspect ignition coil assembly and Perform spark test

  1. Check for DTCs.

  2. Check if sparks occur.

    1. Remove the engine cover.

    2. Remove the ignition coils.

      (Refer to Ignition System - "Ignition Coil")

    3. Using a spark plug wrench, remove the spark plugs.

    4. Disconnect the injector extension connectors.

    5. Ground the spark plug to the engine.

    6. Check if sparks occur at each spark plug while engine is being cranked.

  3. If sparks do not occur, perform the following test.

  4. Using a spark plug wrench, install spark plugs.

  5. Install the ignition coils.

  6. Install the engine cover.