Body Electrical System
Memory power seat unit Repair procedures
In this manual: Body Electrical System
8steps
~48min
2/5difficulty
Done 0 of 8
Removal
Before removing the driver side seat assembly, pull it upward to the maximum by pushing the front seat height adjusting switch (A).

Disconnect the negative (-) battery terminal
Remove the driver front seat assembly.
(Refer to Body - "Front Seat Assembly")
Disconnect the IMS unit connectors (A).


Remove the IMS unit (A) after loosening the mounting screws.


Installation
Install the memory power seat unit.
Install the driver front seat assembly.
Connect the negative (-) battery terminal.
Was this page helpful?