Engine Mechanical System

Oil Cooler Repair procedures

11steps
~66min
3/5difficulty
02040608010055.941N·mlb·ft
Tightening torque found on this page
Done 0 of 11

Removal

  1. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

  2. Drain the engine oil and then remove the oil filter.

    (Refer to Lubrication System - "Engine Oil")

  3. Drain the coolant.

    (Refer to Cooling System - "Coolant")

  4. Disconnect the coolant hose (A).

  5. Unfasten the fixing bolt (A) and then remove the oil cooler assembly (B).

Installation

  1. Apply engine oil to the oil cooler packing surface (A).

  2. Install the oil cooler (A) with a fixing bolt (B).

    Tightening torque : 50.1 - 56 N·m

  3. Connect the coolant hose (A).

  4. Fill the coolant.

    (Refer to Cooling System - "Coolant")

  5. Install the oil filter and then fill the engine oil.

    (Refer to Lubrication System - "Engine Oil")

  6. Install the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")