Engine Mechanical System

Oil Pan Repair procedures

7steps
~47min
3/5difficulty
1special tools
0102030405031.423N·mlb·ft
Tightening torque found on this page
Done 0 of 7

Removal

  1. Remove the engine room under cover.

    (Refer to Engine and Transaxle Assembly - "Engine Room Under Cover")

  2. Drain engine oil.

    (Refer to Lubrication System - "Engine Oil")

  3. Remove the oil pan (A).

    1. Unfasten the bolts.

    2. Insert the blade of SST (09215-3C000) between the lower crankcase and the oil pan. Separate the applied sealer and remove the oil pan.

  4. Remove the oil screen (A) with the gasket.

Installation

  1. Install the oil screen (A) with a new gasket.

    Tightening torque : 24.5 - 31 N·m

  2. Install the oil pan.

    1. Using a gasket scraper, remove all the old packing material from the gasket surfaces.

    2. The sealant locations on the oil pan and the lower crankcase must be free of harmful foreign materials, oil, dust and moisture.

      Spray cleaner on the surface and wipe with a clean duster.

    3. After applying liquid sealant on the oil pan, assemble it within 5 minutes of applying sealant.

      Continuous bead of sealant should be applied to prevent any path of oil leakage.

      Sealant : THREE BOND 1217H or LOCTITE 5900H

    4. Install the oil pan (A). Uniformly tighten the bolts in several passes.

      Tightening torque : 9.8 - 11,8 N·m

  3. Refill engine with engine oil.