Console Repair Procedures

Replacement

Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage. Wear gloves to protect your hands.

1. 1
   To remove the shift lever knob (A), pull it upward with moderate force. Then, using a screwdriver or a trim remover, remove the shift boot (B).

   

2. 2
   Using a screwdriver or remover, remove the floor console upper cover (A).

   

3. 3
   Disconnect the connectors (A).

   

4. 4
   Remove the console tray mat (A).

   

5. 5
   Using a screwdriver or a trim remover, remove the floor console extension cover (A).

   

6. 6
   Loosen the mounting screws and bolts, then remove the floor console assembly (A).

   

7. 7
   Installation is the reverse of removal.

   Make sure the connectors are connected correctly. Replace all damaged clips.

Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage. Wear gloves to protect your hands.

1. 1
   Remove the floor console assembly.
2. 2
   Loosen the mounting screws and remove the rear console cover (A).

   

3. 3
   Loosen the retaining screws, then remove the armrest assembly (A).

   

4. 4
   Installation is the reverse of removal.

   Replace all damaged clips.