Kia Optima Hybrid Owner's Manual Quiz
Body Electrical System

Power Window Switch Repair Procedures

In this manual: Body Electrical System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
12steps
~72min
3/5difficulty
Done 0 of 12

Inspection

Main Power Window Switch Inspection
  1. Disconnect the negative (-) battery terminal.
  2. Remove the front door trim panel. (Refer to Group BD - "Front Door")
  3. Disconnect the connector from the switch.
  4. Check the continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    [Auto Down]
    [Safety Up/Down]
  5. Disconnect the negative (-) battery terminal.
  6. Remove the front door trim panel. (Refer to Group BD - "Front Door")
  7. Disconnect the connector from the switch.
  8. Check the continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
  9. Disconnect the negative (-) battery terminal.
  10. Remove the rear door trim panel. (Refer to Group BD - "Rear Door")
  11. Disconnect the 8-pin connector from the switch.
  12. Check the continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
Passenger/Rear Power Window Switch Inspection Rear Power Window + Seat Heater Switch Inspection

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.