Rear Crossmember Repair Procedures

Replacement

1. 1
   Remove the rear wheel and tire.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the rear wheel and tire.

2. 2
   Remove the rear lower arm. (Refer to Lower Arm)
3. 3
   Remove the rear shock absorber. (Refer to Rear Shock Absorber)
4. 4
   Remove the rear upper arm. (Refer to Rear Upper Arm)
5. 5
   Remove the trailing arm. (Refer to Trailing Arm)
6. 6
   Remove the rear trailing arm. (Refer to Rear Trailing Arm)
7. 7
   Remove the rear muffler.

   

   

   

8. 8
   Loosen the mounting bolts and remove the rear crossmember (A) from the frame.

   Tightening torque: 156.9 ~ 176 N·m

   

   

   

9. 9
   Installation is the reverse of removal.