Rear Stabilizer Bar Repair Procedures

Replacement

1. 1
   Remove the rear wheel and tire.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the rear wheel and tire.

2. 2
   Loosen the nut and remove the rear stabilizer link (B) from the rear lower arm (A).

   Tightening torque: 98.1 ~ 118 N·m

   

3. 3
   Loosen the nut and remove the stabilizer link (A) from the rear stabilizer bar.

   Tightening torque: 98.1 ~ 118 N·m

   

4. 4
   Loosen the mounting bolt and remove the stabilizer bar (B) from the subframe (A).

   Tightening torque: 44.1 ~ 54 N·m

   

5. 5
   Installation is the reverse of removal.

Inspection

1. 1
   Check the rear stabilizer bar for deformation.
2. 2
   Check the ball joint of the rear stabilizer link for damage.