Kia Optima Hybrid Owner's Manual Quiz
Suspension System

TPMS Receiver Repair Procedures

In this manual: Suspension System
General Information — 4Engine Mechanical System — 50Engine Electrical System — 20Emission Control System — 30Engine Control System/Fuel System — 84Automatic Transmission — 98Drive Shaft and Axle — 15Suspension System — 36Steering — 12Restraints — 50Brake System — 38Body (Interior and Exterior) — 54Body Electrical System — 233Heating, Ventilation, and Air Conditioning — 57
5steps
~30min
2/5difficulty
Done 0 of 5

Replacement
When the receiver is first shipped as a replacement part:
a. It will be in the Virginia state.
b. It will not be configured for any specific platform.
b. It will not have any sensor IDs stored in memory.
It is important to make sure the correct receiver is selected for replacing the faulty part, i.e., it must be Low Line, to set the correct inflation warning thresholds.
  1. Disconnect the vehicle battery.
  2. Remove the glove box. (Refer to Group BD - "Crash Pad")
  3. Remove the faulty part and install the bracket assembly onto the new part.
  4. Secure the new part to the vehicle and connect the connector.
  5. Reconnect the battery and turn the ignition on. Vehicle model name entry
    VIN entry

Test yourself

A quick Kia Optima Hybrid Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.