Kia Sorento XM 2011-2023 Repair Manual
Disassembly of Rear Propeller Shaft
In this manual: Kia Sorento XM 2011-2023 Repair Manual
5steps
~30min
3/5difficulty
Done 0 of 5
- Remove the TJ boot clamps and pull the TJ boot off the TJ outer race.
- Using pliers or a flat-tip (-) screwdriver, remove the LH boot band and LH TJ boot band from the propeller shaft.
- Remove the RH boot band and RH TJ boot band in the same manner as the LH removal procedure.
- Pull the propeller shaft out of the TJ outer race.
- Remove the snap ring (A), then remove the inner race (B), cage (C) and ball (D) assembly.

- Clean the inner race, cage and balls without disassembling them.
- Remove the BJ boot bands and pull off the TJ boot and BJ boot.

Test yourself
A quick Kia Sorento Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?