Body (Interior and Exterior)

Outside Rear View Mirror Repair Procedures

5steps
~30min
2/5difficulty
0102030405010.88N·mlb·ft
Tightening torque found on this page
Done 0 of 5

Replacement

  • Wear gloves to protect your hands.
  • Using a flat-tip screwdriver, wrap protective tape around the tip and apply protective tape around the relevant parts to prevent damage.
  • Be careful not to scratch the body surface.
  1. Using a screwdriver or removal tool, remove the front door handle bezel inner cover (A).
  2. Loosen the outside rearview mirror mounting screw (A).
  3. After loosening the mounting bolts, remove the outside rearview mirror (A).
  4. Disconnect the outside rearview mirror connector (B).

    Tightening torque: 6.9~10.8 N·m

  5. Install in the reverse order of removal.
    • Make sure the connectors are connected correctly.
    • Replace all damaged clips.

Test yourself

A quick Kia Soul EV Owner's Manual quiz: every answer comes with an explanation and a link to the manual page.